Automatic medium and large motor Stator coil Intermediate Forming Machine for pump motor
Company and Contact info
Z2XJ3-300-300F Stator Intermediate Forming Machine
This stator forming machine is with an enter and exit station so as to easy doing loading and unloading. The coil will be expnading after forming, and the dimension can be as per customer’s requirement.
(1) Technical data
Stator ID: 30~110mm
Stator OD: Max. 160mm
Stator stack length: 20~200mm
Winding overhang: Max 45mm
Displacement of cylinder: 20L/min
Power: 380V/50/60HZ 3.75KW
Machine weight: about 500Kg
Machine dimension: (L)1300*(W)1000*(H) 2400mm
The stator coil middle forming machine is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.
(3) Machine main function and characteristic
This machine adopts whole hydraulic system and PCL program.
This machine can adjust the forming stack length by changing washer.
This machine has five oil cylinders which work individually to expend inner coil, wrap outer coil and form hang over.
After forming, there is no copper wire enamel broken or wire snap. and coil OD and ID is close to the final forming dimension.
Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.
Production capacity ≤14s/set (exclude loading/unloading time)
Primary qualification rate ≥98.5%, after rework, the rate ≥99.5%
This machine adopts safety grating protection system. Operator need to stand when operating.
Machine adopts two hands simultaneously start button to ensure safety
Ningbo Nide Mechanical Equipment Co., Ltd.
Address：14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo , China.