Rotor automatic commutator turning machine
Company and Contact info
ND-LHL-QSFA2 Rotor automatic commutator turning machine
This commutator turnning machine is suitable for turning various type of armatures. Servo motor takes use of universal coupling to drive flat belt; Rotor rotary was done by pressure friction between flat belt and rotor round OD. Rotor shaft do high speed coaxial rotary on arc diamond V-shape holder. Cross feed and longitudinal feed was carried out by servo motor and ball screw. This action was done continuously to finish high precision turning. All actions are controlled by PLC.
1. Process precision: Inter-segment roundness < 1.5um, surface roughness < 0.4um
2. Speed adjustment range
The speed adjustment range is from 0Hz to 100Hz. Meanwhile, user can set any belt speed on touch screen.
3. Feeding value
It could be set up randomly among 1um-0.1um. Normally, 1st feeding value is bigger than 2nd one, 2nd one is bigger than 3rd one and last one could be set up by factory on its experience.
4. Turning times
The maximum turning time of the X spindle direction is 4 times, while so is the Z spindle direction. User could set the turning times for each rotor according to their own needs.
5. Control mode
There are two control modes, single action and automatic action. Commission can be done under the on condition of single action.
6. Operation: Setting up and parameters revise even password modification and commission can all be done in touch screen.
7. Compressed air: Air source pressure 0.5MPa~0.7Mpa(5Kgf/cm2~7Kgf/cm2)
8. Motor: AC servo motor 750W OMRON
9. Power supply: AC220V+/-5% 50Hz/60Hz
10. Weight and dimension: Around 1100KG 1300mm x 900mm x1570mm
Ningbo Nide Mechanical Equipment Co., Ltd.
Address：14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo , China.