high efficiency Motor armature balancing rotor testing machine
Company and Contact info
ND-DH-6Z high efficiency Motor armature balancing rotor testing machine
The armature balancing equipment is used to measure the armature\’s unbalance. and it can measured Up to 35 different types of rotor.The rotor balancing machine is widely used in the motor field, such as wiper motor, vacuum cleaner motor, mixer motor, window lifter motor, condenser motor, power tool motor, DC motor, etc.
The armature balancing equipment is used to measure the armature’s unbalance. Man-machine interface can show the unbalance with its angle and value. The control system includes single chip, PLC and a man-machine interface.
The rotor balancing maching can measured Up to 35 different types of rotor
The rotor balancing machine is widely used in the motor field, such as wiper motor, vacuum cleaner motor, mixer motor, window lifter motor, condenser motor, power tool motor, DC motor, etc.
(2)Why armature balancing test
improve the quality of the rotor and its composition
Extend the service life of bearing components (bearings)
reduce the user’s discomfort, reduce product consumption.
(3) Machine function and characteristic
1.This armature balancing machine automatically measures the unbalancing amount of the armature, automatically stops the armature at the unbalancing position
2.Imbalance point positioning automatically
3.No need to mark on the armature (such as reflective sheet, black mark an so on)
4.Low operation skill requirement to staff
5.Reduce the complexity of the machine operation
6.Operator needs to stick the balancing mud onto the unbalancing position manually.
(4) Main technical data:
Production name: ND-DH-6Z Upgraded version dynamic armature balancing mahcine
Range of application: Armature,Rotors
Armature diameter: 20mm~80mm
Stack height: 20mm-70mm
Ambient temperature: – 5℃~45℃
rotating speed: 2100 rpm
Cycle time: ≤10 second
Power supply Uniphase phase: AC220V±10% 50Hz
Maximum weight: 3Kg
Maximum armature parameter: 35 different armatures
(5).Operating Ambient parameters
The armature balancing equipment can be used continually and normally in 72 hours under below condition when Ambient temperature is -5℃~45℃ and the Humidity is 83~95%RH(+40℃)or 68~74%RH(-15℃)
Ningbo Nide Mechanical Equipment Co., Ltd.
Address：14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo , China.