Products

Fully automatic motor armature rotor production assembly line

Short Description:

This automatic produciton assembly line is used for the manufacturing production of motor rotors.


  • Brand Name: NIDE
  • Origin: China
  • Price: Negotiable
  • Packaging Details: Wooden case which is suitable for sea transportation
  • Payment Terms: L/C,T/T
  • model: ND-ZZX-5
  • Product Detail

    Company and Contact info

    Product Tags

    Fully automatic motor armature rotor production line

    I. The armature rotor production line introduction:

    This automatic produciton assembly line is used for the manufacturing production of motor rotors (commutators can be hook or groove).

    The automatic motor armature manufactuing line is transmitted by the belt conveyor line, and the front and rear machines can be connected according to a predetermined communication protocol to realize intelligent automatic production, and the workpiece transfer, loading and unloading, detection, and production process transfer can be completed without manual intervention.

    The motor rotor production assembly line consists of the main operating table (including the upper and lower feed ports), the rotor shaft pressing machine, the rotor commutator pressing machine , the automatic rotor insulation paper insertion, the double flyers armatur rotor coil winding machine, and the fully automatic rotor commutator spot welder, the automatic rotor slot wedge insertion machine, the armature rotor commutator turning machine, the armature rotor deburring machine, the fully automatic rotor integrated testing machine.

    These machines form an automatic rotor production line through belt conveyors.

    The workpiece is placed in the production line from the console.

    The entire production line will complete the corresponding process according to the relevant process.

    Finally, it will be recycled back to the lowering port to remove the completed workpiece.

    Each process equipment has functions such as separate setting, display, operation, sound and light alarm.
    II. Performance and characteristics

    1. This automatic rotor manufacturing production line includes armature shaft presser, armature rotor commutator press, rotor insulation paper automatic inserter, double fly fork armature rotor winder, fully automatic rotor commutator spot welder, automatic armature rotor slot wedge inserter , rotor commutator finishing turning machine, rotor commutator deburring machine, and fully automatic armature rotor testing machine.

    2. The complete rotor manufacturing line equipment can be automatically connected or operated independently.

    3. Advanced and sophisticated host manufacturing technology combined with a powerful belt conveyor system for a variety of different planar configurations.

    4. It has the advantages of simplicity, flexibility, high efficiency and reliability, which can greatly save manpower, reduce labor intensity and effectively improve production and quality.

    5. High-strength all-aluminum frame structure, simple and elegant appearance.

    6. The main operation console can perform centralized display monitoring and inquiry on the entire production system, and can read and write the process status of the product by manual input instructions, which can change the process of processing the product, and the operation is more humanized.

    7. Compared with the pneumatic conveying line, the transmission efficiency is higher, the noise is smaller, and the workpiece is not damaged during transportation; the belt conveying structure combined with the intelligent identification system realizes flexibility from hardware and software, and makes the wiring more flexible and diverse.

    8. The whole rotor manufacturing line adopts automatic identification control system. Each process can automatically read, write and identify the machining status of the workpiece, so that the line body can better adapt to complex and diverse production process requirements.

    9. Customers can configure different models into a highly efficient and practical automatic production line according to the actual conditions such as product type, technical indicators and production requirements.


    III.The main equipment parameters

    We can customize the machine according to customer needs, please contact us if you need it.

    a. Auto armature rotor commutator pressing machine parameters

    Product name Motor armature commutator pressing machine
    Armature O.D: 20-60mm   
    Shaft O.D: 3-15mm
    Shaft length: 32-250mm
    Armature slot number: 8-24 slots
    Commutator O.D: 8-40mm
    Speed amplitude modulation: 0-670Hz
    Air source: 6-6Kg/cm2
    Total power: 1.0KW
    Power source: AC220V,50/60Hz
    Weight: About 400Kg
    Dimension: 910*880*1300mm


    b. Double flyer winder armature coil winding machine parameters

    Product name Armature rotor coil winding machine
    Wire diameter: 0.25~1mm
    Armature O.D: 20~60 mm
    Armature stack length: 10~60 mm
    Slot type: straight slot(No more than 36 slots)
    Armature slots number: Odd, even slot
    Counting Range: 0~99999
    Commutator diameter: 18~40 mm
    Fly fork speed: 0~3000 rpm
    Indexing speed: 0~3000 rpm
    Action process: Single action, automatic
    Air pressure : 4~6 Kg/cm2 ,0.5-0.7MPa
    Machine power: 4KW
    Temperature: -10~40ºC
    Humidity: 40~90%
    Power supply: 3phase 380V±10%  50/60 Hz
    Total weight: about 1,180 Kg
    Dimension: 2000(length)×1300(width)×1800(height) mm3
    Production efficiency: 800-900set/class(calculated based on 12slots 24hooks, 20turns)

    c. Fully auto motor armature commutator spot welding machine parameters                         

    Product name Armture commutator hotstaking machine
    Loading method: (choose any one from the following three methods) 1.Manually loading/unloading2.Manually push guide rail to load/unload3.Cylinder loading/unloading
    Indexing method: servo indexing
    Commutator type: hook or riser
    Wire diameter: 0.2mm-1.0mm
    Armature diameter: 20mm-60mm
    Armature Stack length: 10mm-60mm
    Shaft length: 50mm-250mm
    Commutator diameter: 10mm-40mm
    Shaft diameter: 3mm-17mm
    Commutator hook/riser number: ≥3
    Zero finding method: manually place armature, cylinder drive one block for positioning
    Pressure control method: spring + cylinder + pressure detection
    Welding head cooling method: water cooling
    Parameter setting: set on the touch screen and power source , Parameter also can be set
    Power source control method: close loop feedback, high accuracy , inversion
    Compressed air pressure: 4kg/cm2-6kg/cm2
    Welding source power: three phase AC380V±10%  50HZ  40KW
    Water cooler power: three phase AC380V±10%  50HZ 
    Machine weight: 800kg(for reference)
    Dimension: 785(L)x 910(W)x 2100(H)mm 3 (for reference)             

    IV.The main equipment picture display

    1.The double flyer armature rotor coil winding machine

    motoro-rmature-manufacturing-production-line91

    2. The armature commutator spot welder hot staking machine

    motoro-rmature-manufacturing-production-line92

    3.The armature rotor commutator turning machine

    motoro-rmature-manufacturing-production-line93

    xh

    3-3

    Youtube: https://www.youtube.com/user/nida0606
    Facebook: https://www.facebook.com/NideGroup
    Linkedin: https://www.linkedin.com/company/nide-mechanical
    Twitter: https://twitter.com/Nide_Group
    Instagram: https://www.instagram.com/nidegroup/

    xh

    Contact us
    Ningbo Nide Mechanical Equipment Co., Ltd.
    Contact :Annie
    Tel: 0086-574-87295639
    Mob: 0086-13738869026
    Fax: 0086-574-87295637
    Email: emarketing@nide-group.com
    Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo , China.


  • Previous:
  • Next:

  • NIDE company information NIDE certifications

    NIDE contaction 2

  • 
    WhatsApp Online Chat !