Automatic vacuum cleaner rotor winding machine -flyer winding machine supplier
Company and Contact info
ND-LAW-5B3 Automatic vacuum cleaner rotor winding machine
This type of rotor winding machine adopts international advanced technology that use AC servo for winding and indexing. Also, this series of armature
winding machine uses colorful LCD which is easy for users to change the parameter, and improve the efficiency largely. It is suitable for small wire diamter winding. The coil winding machine is a good choice for motor manufacturer.
Wire diameter 0.08~0.30mm (Mechanical type)
Winding slots Odd/even number
Commutator diameter 8~40mm
Armature diameter 20~60mm
Armature stack length 10~60mm
Winding motor speed 0~3000 rpm
Control system Mitsubishi PLC control
Air supply pressure 5~7 Kg/cm2
Voltage AC220V 50/60Hz
(2) Machine Feature:
Three winding mode: single slot-single hook, single slot-double hook and double layer winding. It could do twice winding in one slot, four times winding in the two adjacent slots. It has automatic treatment for wire broken, 2 settable sequences is: winding before broken, or broken before winding.
Production parameter for 100nos armatures could be stored
Display parameter, including shift output, total output, consuming time, etc.
Automatic alarm if any abnormal condition occurs
Single action, automatic and stepping operation could be switched
Steady fixture, up and bottom protective tooling and protective wire hooking device
Loading mode: cylinder feeding armature automatically, get out finished armatures manually
(3)Common malfunction of this machine
Sometimes, there is servo alarm displayed on the touchscreen. In this case, there will be error code displayed on the servo driver(at the backside of machine), you could identify the problem according to the error code. The most common malfunction is the encoder cable which connects the servo driver and servo motor is loose, just need remove and reinsert the encoder cable again, problem will be solved.
Ningbo Nide Mechanical Equipment Co., Ltd.
Address：14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo , China.