Automatic Armature Powder Coating Machine
Company and Contact info
ND-JF 90G Automatic Armature Powder Coating Machine
This powder coating machine is suitable for armature slot or lamination to do powder coating. The rotor powder coating machine can do powder coating, powder blowing, and powder recyling automatically. It is suitable for mass production.
(1) Machine function and characteristic
This rotor powder coating machine has a wide application, and easy for operation. The coated armature has shiny surface, even thickness, good electricity performance.
Small motor is transported to fluid bed by screw for coating. Insulation power is equally coated on its surface, and then cured by high frequency heating. This machine consists of coating, curing, cooling and powder recycling. Except loading and unloading, the other processes are completed automatically.
(2) Main technical data:
Armature max OD: 120mm
Armature max stack length: 70mm
Armature max shaft length:180mm
Recycle efficiency: ≥95%
Line speed m/min; 0.1-1.5m adjustable
Coating thickness: 0.15mm-0.5mm adjustable
Production efficiency: 1500pcs/hour
Screw rod length: 3500mm
Feeding speed: 0~0.5RPM
Static voltage: 0~60KN
Static current: ≤200μA
Air source pressure: 0.5~0.7MPa
Voltage: 380V three phase
High frequency power: 30KW
Total dimension: 4900mm*2500mm*2000mm
This armature powder coating machine is widely used in mini rotor insulating coating, such as automotive, motorcycle, power cycle, toy and small electromotor of appliance.
Ningbo Nide Mechanical Equipment Co., Ltd.
Address：14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo , China.