Automatic hook type commutator Armature Copper Wire Winding Machine
Company and Contact info
ND-LAW-5B4 Automatic Armature Copper Wire Winding Machine
This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding,indexing and wire cutting, only load and unload armature from material loader. Equipped with touch screen and PLC, winding parameter could be set and modified on the screen. We also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. Below parameter is our standard machine, we could produce machine according to customer’s armature accordingly.
(1) Technical Parameter:
Magnetic hysteresis method:0.16~0.55mm
Electric control method:0.30~0.85mm
Armature O.D range
Less than 300mm
Winding motor power
1.5KW * 2
Angle detecting speed
Angle detecting motor power
Air supply pressure
The machine total power
Three phase AC380V50/60Hz
(2) Production efficiency of this machine
Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn number.
(3) The operation steps of this machine
Load armature on the shuttle manually, press START button,shuttle will deliver the armature to the winding position, and automatic winding, indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position, operator unload the finished armature, one cycle is completed.
Ningbo Nide Mechanical Equipment Co., Ltd.
Address：14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo , China.