Automatic 2 Poles Stator Coil Winding Machine with touch screen
Company and Contact info
RXL1-160 Automatic 2 Poles Stator Coil Winding Machine
(1) Machine main function and characteristic
Winding tooling: each machine has one set winding tooling and three vertical winding forms.
The whole set of tooling can be changed, and it takes about 15min.
The turntable is two stations structure. It adopts servo system to rotate and index transfer form.
Allow three wires winding simultaneously.
Main spindle is controlled by servo motor. The coil turn number accuracy is ±1 turn.
The working rotation speed can be set . Machine has no distinct vibration and noise.
Free of enamel damage and wire snap. Once the copper wire is run out, machine will automatically stop.
PLC can set turn number, winding speed, tooling sunk height, tooling sunk speed and winding direction.
X and Y spindle of wire hooker and wire cutter adopts servo system. It can adjust the length of bridge wire and lead wire.
Tooling sunk adopts servo system. The max segment number of tooling sunk is 6.
(2) Main technical data
Winding head: 1pc
Wire diameter: 0.2~1.2mm
Winding speed: ≤2500RPM
Max stack OD: 160mm
Max stack height: 100mm
Fly fork diameter: 300mm
Transfer number: 1~5 section
Power supply: 380V/50/60HZ 7KW
Weight: about 1000kg
This machine is suitable for 2 poles, 4 poles and 6poles coils winding.
(4) Picture show:
Ningbo Nide Mechanical Equipment Co., Ltd.
Address：14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo , China.